33,000ft Mens Hooded Waterproof 3-in-1 Ski Jacket review: specs, sizing and what it costs you
The 33,000ft Mens Hooded Waterproof 3-in-1 Ski Jacket sits in the under-$100 budget tier. Published specifications: Construction 3-in-1, zip-out liner, Waterproof Coated, Use Resort. Best for: A first ski jacket for resort days.
The 33,000ft Mens Hooded Waterproof 3-in-1 Ski Jacket is a shell in the under-$100 budget tier, and this page is the short version of everything published about it: the manufacturer's own specifications, who it suits, what it gives up against the alternatives, and where it sits on the shelf it competes on. We have not skied this item and we do not pretend to have. Everything below is researched from published specifications, published certification standards and verified owner reviews.
A zip-out liner is two jackets for the price of one and covers a cold day and a spring day without a second purchase. For a first season at a resort that is the right trade.
An uninsulated shell over a separate midlayer beats an insulated jacket at every temperature except one, because you can take the insulation out. That single switch is what turns a pile of ski clothing into a system.
Published specifications
These are the manufacturer's figures, not measurements we took. Specifications change between model years and between sizes, and a listing tied to one size is exactly that, so confirm the numbers on the retailer page for the size you are actually buying before you commit.
| Category | Jackets and pants |
|---|---|
| Brand | 33,000ft |
| Budget | Under $100 |
| Tier | Beginner |
| Construction | 3-in-1, zip-out liner |
| Waterproof | Coated |
| Use | Resort |
| Used for | Both resort and backcountry use |
Who it suits
A first ski jacket for resort days.
What it costs you
A coated fabric wets out in sustained wet snow, and the breathability is not enough for climbing in.
That trade is worth stating plainly because it is the thing a product page will never tell you. Nothing in snow sports is free: every gram removed from a ski comes out of its damping, every degree of cuff rotation added to a boot comes out of its downhill stiffness, and every dollar saved on a shell comes out of either the fabric or the features. The question is never whether an item has a weakness, it is whether that particular weakness lands on the days you actually ski.
Where it sits on the shelf
It sits 3 of 10 on price on this shelf, between Arctix Mens Essential Insulated Bib Overalls at under $50 and Roxy Womens Lunalite GORE-TEX 3L Ski Jacket at under $1,000.
Compared with the rest of the shelf
Prices are what the retailer listed when this page was last checked and change constantly. We earn commissions from Backcountry and from qualifying Amazon purchases, and every outbound link in this table is one or the other. A button reading "BC category" opens a Backcountry search for that category rather than that exact model, so it finds comparable gear alongside it.
How to shop this category
An uninsulated shell over a separate midlayer beats an insulated jacket at every temperature except one, because you can take the insulation out. That single switch is what turns a pile of ski clothing into a system you can tune to the day, and it is the most useful clothing decision on this site.
Construction is the specification that decides durability. A two-layer garment bonds the membrane to the face fabric and hangs a separate liner inside; it is cheaper and bulkier. A three-layer garment bonds face fabric, membrane and backer into one, which is lighter, more packable and far more durable under pack straps and ski carries. Fully taped seams are the difference between a jacket that keeps snow out and one that leaks at every stitch line after an hour in wet snow.
Waterproofing and breathability are quoted as a hydrostatic head in millimetres and a moisture vapour transmission rate in grams. Roughly 10,000 mm and 10,000 g is the practical floor for resort skiing, 20,000 and 20,000 is a genuinely waterproof and breathable shell, and the marketing numbers matter less than pit zips, which vent more moisture in a minute than any membrane does in an hour. Powder skirts, helmet-compatible hoods and pass pockets are the features you actually use.
Two layer, three layer, and what taped seams mean
A two-layer garment bonds the membrane to the face fabric and hangs a separate liner inside; a three-layer garment bonds face fabric, membrane and backer into one, which is lighter, more packable and far more durable under pack straps and ski carries. Fully taped seams are the difference between a jacket that keeps snow out and one that leaks at every stitch line after an hour on a chairlift in wet snow. Any waterproof-breathable fabric wets out eventually and needs its durable water repellent finish refreshed, which is a wash-in treatment and a warm tumble dry, not a new jacket.
The three mistakes this category produces
Buying an insulated jacket as the only shell
It is warm at exactly one temperature. A shell plus a separate midlayer covers a 40 degree range for similar money.
Judging a shell by its waterproof rating alone
Pit zips move more moisture than any membrane. Taped seams and a helmet-compatible hood matter more than the last 10,000 mm.
Never reproofing
Every waterproof-breathable fabric wets out eventually. A wash-in DWR treatment and a warm tumble dry restores it, and people buy new jackets instead.
Looking after it
Wash it more often than you think, with a technical wash rather than detergent, because body oils and dirt block breathability. Tumble dry warm to reactivate the durable water repellent finish, and reapply a wash-in DWR when water stops beading. Do not use fabric softener, and repair small tears with a patch immediately before they run.
None of that is glamorous and all of it is cheaper than replacing the item. The pattern across every category on this site is the same: snow sports equipment is destroyed by water, heat and neglect far more often than by use, and the difference between gear that lasts three seasons and gear that lasts ten is almost entirely what happens to it in the twenty minutes after you get home.
Which build this appears in
This item is a line in one of the complete build ladders on this site, which means it has been costed against everything else you would buy alongside it rather than picked in isolation. That is the useful way to look at any single purchase: what it does to the total.
- The first resort ski setup: Everything you need to stop renting, at the lowest total cost that still gets you a certified helmet and a boot you can stand in all day.
What to read next
If you are still deciding between models, the full jackets and pants roundup ranks the shelf by tier with the same published specifications used here. If you have not settled on the rest of the kit yet, the build guides hub budgets a complete setup line by line with a running total, which is a more useful way to spend a budget than optimising one item.
For sizing, the calculators cover ski length, snowboard size, mondopoint boot sizing, skin width and the skier code your shop uses to set a binding. The reference charts hold the same numbers in printable table form, and the comparisons work through the decisions where two reasonable options genuinely pull in different directions.
Frequently asked questions
Who is the 33,000ft Mens Hooded Waterproof 3-in-1 Ski Jacket best for?
A first ski jacket for resort days.
What are the drawbacks of the 33,000ft Mens Hooded Waterproof 3-in-1 Ski Jacket?
A coated fabric wets out in sustained wet snow, and the breathability is not enough for climbing in.
Shell and midlayer, or an insulated jacket?
A shell with a separate midlayer, for almost everyone. It covers a much wider temperature range for similar money, it lets you dump insulation on a warm spring day, and the shell outlives several midlayers. An insulated jacket is simpler and warm at one temperature.
What waterproof rating do I need for skiing?
Around 10,000 mm hydrostatic head and 10,000 g breathability is the practical floor for resort skiing, and 20,000 by 20,000 is a genuinely capable shell. Taped seams and pit zips matter more than the last few thousand on the number, since venting moves more moisture than any membrane.
What is the difference between two-layer and three-layer?
Two-layer bonds the membrane to the face fabric with a loose liner hanging inside, which is cheaper and bulkier. Three-layer bonds face fabric, membrane and backing into one piece, which is lighter, more packable and much more durable under pack straps.
How do I stop my jacket wetting out?
Wash it with a technical wash, tumble dry it warm to reactivate the finish, and reapply a wash-in durable water repellent treatment when water stops beading. A jacket that wets out is not broken, it is dirty and due for reproofing.
How we choose: we compare published manufacturer specifications, published certification standards and verified owner reviews across retailers. We do not test equipment in person, and every figure quoted here is the manufacturer's published number unless we say otherwise. This is researched buying guidance and not professional instruction: binding release values are set by a certified technician on a calibrated jig, and avalanche terrain requires formal training and a current regional forecast that no article can replace.
